View Full-Size Image
|
NS-200FT
|
|
|
| Ask a question about this product |
Description
The NS-200FT is a Ethernet(10/100Base-TX) to Fiber Optic(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.
The NS-200FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125¼m fiber cables; in half duplex mode, range is 412m with 62.5/ 125¼m fiber cables.
It contains "soft start" function with overload protection, high-low voltage protection.
The width of the NS-200FT is just 32.30 mm, so it can be used where space is important.
|
Ordering information
NS-200FT CR
Industrial 10/100 Base-T to 100 Base-FT Fiber Optical Converter
NS-200FC CR
Multi-mode Industrial Ethernet Switch with Fiber Optics
NS-200FCS CR
Single-mode Industrial Ethernet Switch with Fiber Optics
NS-200WDM-A
10/100BaseT(X) to 100BaseFX Single-Strand Media Converter, TX 1310 nm, RX 1550 nm, SC (RoHS)
NS-200WDM-B
10/100BaseT(X) to 100BaseFX Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC (RoHS)
|
|
| Features |
Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
1.4Gbps high performance memory bandwidth.
Frame buffer memory : 512 Kbit
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
MTBF = 438,000 hours ( Temperature is 25 °)
MTBCF = 525,600 hours ( Temperature is 25 °)
Supports +10~+30Vdc voltage Reverse Polarity Protection
Supports operating temperatures from 0 ~ +70°C
DIN rail mount for industrial usage
|
| Specifications |
| |
| Technology |
| Standards |
IEEE802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward wire speed switching - no delays |
| MAC Addresses |
1024 |
| Memory Bandwidth |
1.4 Gbps |
| Flow Control |
IEEE802.3x flow control, back
pressure flow control |
| Interface |
| RJ45 ports |
10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection |
| Fiber Optic port |
100 Base-FX(Multi-mode; ST connector) |
| LED Indicators |
10/100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Frame Ground for EMS Protection |
Yes |
| Fiber Optic |
Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm |
| Distance :2 km, (62.5/125 μ mrecommended) for full duplex |
| Wavelength : 1300 or 1310nm |
| Min. TX Output:- 20 dBm |
| Max. TX Output: -14 dBm |
| RX Sensitivity: -34 to -31 dBm |
| Power |
| Input Voltage Range |
+10 ~ +30VDC (Non-isolation) |
| Power consumption |
0.12A@24VDC, +/- 5% arrowed with 100M Full duplex |
| LED Indicator |
Yes |
| Protection |
Power reverse polarity protection |
| Frame Ground for EMS Protection |
Yes |
| Connection |
3-Pin Removable Terminal Block |
| Mechanical |
| Case |
Plastic |
| Flammability |
UL 94V-0 |
| Dimensions |
32.30mm x 99.00mm x 77.50mm (W x H x D) |
| Installation |
DIN rail mount |
| Environmental |
| Operating Temperature |
0 ~ +70°C |
| Storage Temperature |
20 ~ +85°C |
| Ambient Relative
Humidity |
10% to 90% non-condensing |
|
|
|
|
|
|
|
|
|
| Featured Products |
|
|
