NS-200FTNS-208
View Full-Size Image
|
NS-205
|
|
|
| Ask a question about this product |
Description
The NS-205 has 5 Ethernet Switching ports that support 10/100Base-T, with a 10/100M auto-negotiation feature and auto MDI/MDIX function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45.It contains "soft start" function with overload protection, high-low voltage protection. The width of the NS-205 is just 32.30 mm, so it can be used where space is important.
|
Ordering information
NS-205G CR
Unmanaged 5-Port Industrial 10/100/1000 Base-T Ethernet Switch (RoHS)
NS-205-IP67
Unmanaged 5-Port Industrial Ethernet Switch with IP67 casing
NS-205FC CR
Uamanaged 4-port Industrial 10/100 Base-T(X) with 100 Base-FX Fiber Switch (Plastic case)
NSM-205FC CR
Uamanaged 4-port Industrial 10/100 Base-T(X) with 100 Base-FX Fiber Switch (Metal case)
NS-205FCS CR
Uamanaged 4-port Industrial 10/100 Base-T(X) with 100 Base-FX Fiber Switch (Plastic case)
NSM-205FCS CR
Uamanaged 4-port Industrial 10/100 Base-T(X) with 100 Base-FX Fiber Switch (Plastic case)
NS-205FT CR
Uamanaged 4-port Industrial 10/100 Base-T(X) with 100 Base-FX Fiber Switch (Plastic case)
NSM-205FT CR
Uamanaged 4-port Industrial 10/100 Base-T(X) with 100 Base-FX Fiber Switch (Metal case)
|
|
| Features |
Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
1.4Gbps high performance memory bandwidth.
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
MTBF = 438,000 hours( Temperature is 25 °)
MTBCF = 525,600 hours ( Temperature is 25 °)
Supports +10~+30Vdc voltage Reverse Polarity Protection
Supports operating temperatures from -30 ~ +75°C
DIN rail mount for industrial usage
|
| Specifications |
| |
| Technology |
| Standards |
IEEE802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward wire speed switching - no delays |
| MAC Addresses |
1024 |
| Memory Bandwidth |
1.4 Gbps |
| Flow Control |
IEEE802.3x flow control, back
pressure flow control |
| Interface |
| RJ45 ports |
10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection |
| LED Indicators |
Power, 10/100M,
Link/Act |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Frame Ground for EMS Protection |
Yes |
| Cable |
Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm |
| Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
| Power |
| Input Voltage Range |
+10 ~ +30VDC (Non-isolation) |
| Power consumption |
0.1A@24VDC, +/- 5% arrowed with 10M Full duplex. |
| 0.09A@24VDC, +/- 5% arrowed with 100M Full duplex |
| Protection |
Power reverse polarity protection |
| Frame Ground for EMS Protection |
Yes |
| Connection |
3-Pin Removable Terminal Block |
| Mechanical |
| Case |
Plastic |
| Flammability |
UL 94V-0 |
| Dimensions |
32.30mm x 99.00mm x 77.50mm (W x H x D) |
| Installation |
DIN rail mount |
| Environmental |
| Operating Temperature |
-30 ~ +75°C |
| Storage Temperature |
-40 ~ +85°C |
| Ambient Relative
Humidity |
10% to 90% non-condensing |
|
|
|
|
|
|
|
|
|
| Featured Products |
|
|
