NS-208
View Full-Size Image
|
RS 405
|
|
|
| Ask a question about this product |
Description
The RS-405 is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. RS-405 supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.
Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. It detects and recovers from a fiber or copper link failure within approximately 300ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.
RS-405 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-405's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure. |
Features
AMD 80188-40 Embedded CPU, or compatible
Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
3.2Gbps high performance memory bandwidth
Frame buffer memory : 1 Mbit
Integrated look-up engine with dedicated 2 K unicast MAC addresses.
Redundant Power Inputs +10 ~ +30V DC
Power failure alarm by relay output
Supports operating temperatures from -30°C ~ +75°C
DIN rail mount for industrial usage |
Ordering information
RS 405 CR
Industrial Ethernet Real-time-ring Switch(Plastic case)
RSM 405
Industrial Ethernet Real-time-ring Switch(Metal case)
RS-405FT
3-Port 10/100 Base-T with 2-Port 100 Base-FX Fiber Redundant Ring Switch (RoHS)
RSM-405FT
3-Port 10/100 Base-T with 2-Port 100 Base-FX Fiber Redundant Ring Switch (RoHS)(Metal case)
RS-405FC
3-Port 10/100 Base-T with 2-Port 100 Base-FX Fiber Redundant Ring Switch (RoHS)
RSM-405FC
3-Port 10/100 Base-T with 2-Port 100 Base-FX Fiber Redundant Ring Switch (RoHS)(Metal case)
RS-405FCS
3-Port 10/100 Base-T with 2-Port 100 Base-FX Fiber Redundant Ring Switch (RoHS)
RSM-405FCS
3-Port 10/100 Base-T with 2-Port 100 Base-FX Fiber Redundant Ring Switch (RoHS)(Metal case)
RS 408 CR
8 Port Redundant Ring Switch(Plastic case)
RSM 408 CR
8-Port Redundant Ring Switch with metal case (RoHS)
|
Specifications
| Technology |
| Completely compliant |
IEEE 802.3, IEEE 802.3u, IEEE802.3x |
| Ethernet switch type |
Intelligent store & forward |
| MAC addresses supported |
2K |
| Memory Bandwidth |
3.2 Gbps |
| Interface |
| RJ45 ports (shielded) |
10/100BaseT(x) |
| RJ45 speed (auto-negotiating) |
10 Mbps or 100 Mbps |
| RJ45 auto-mdi/mdi-x |
All 5 ports |
| Ethernet isolation |
1500 VRMS 1 minute |
| Power |
| Required supply voltage |
+10 ~ +30 VDC |
| Power input isolation |
1KV |
Power consumption
(Redundant input terminals) |
5 W
(typical - all ports active at 100 Mbps) |
| Mechanical |
| Case |
Plastic |
| Flammability |
UL 94V-0 |
| Dimensions |
64mm x 110mm x 97.5mm (W x H x D) |
| Installation |
DIN rail mount |
| Environmental |
| Operating Temperature |
-30°C ~ +75°C |
| Storage Temperature |
-40°C ~ +85°C |
| Include cable |
| CA-090510 x 1 |
|
|
|
|
|
|
|
|
|
| Featured Products |
|
|
