I-7188E1
View Full-Size Image
|
I-7188E2
|
|
|
| Ask a question about this product |
Description
The i-7188EX, Embedded Internet/Ethernet Controller, focuses in Embedded Control applications while the i-7188EN, Internet Communication Controller, focuses in communication applications. According to different embedded firmware and application program, the Internet Communication Controller can be used as Device Server or Addressable Ethernet to RS-232/485/422 Converter or Embedded Internet/Ethernet Controller. The user should refer to comparison table to choose optimal product. Now we offer wide range Internet Communication Controllers, such as i-7188E1 / E2 /E3 /E4 / E5 / E8. Except the RTC circuitry, the basic hardware of i-7188EN is similar to i-7188EX. Since there are too many configurations for i-7188EN series product, OEM or ODM version is welcomed. Can be used as Addressable Ethernet to RS-232/485/422 Converter .
Most RS-232/485/422 devices don't support device address. The i-7188EN series can assign a unique address to any RS-232 device installed in the Ethernet network. Host-PC can send command with device address to Ethernet network, the destination i-7188EN will remove the address field & pass the other fields of command to its local RS-232 device. The response of this local RS-232 device will be passed to host-PC via this destination i-7188EN.
Can be used as Ethernet to RS-232/485/422 Device Server The Device Server is an appliance that network enables any device with a serial communication port. By virtue of its independent operating system, protocol independence, small size and flexibility, Device servers are able to meet the demand of virtually any network-enable application. Most devices don't have network ports. Our Internet Communication Controllers allow those devices to become connected to the network.
Can be used as Embedded Internet/Ethernet Controller Except the Real Time Clock, the hardware and software of i-7188EN is similar to i-7188EX. The user can use well-developed libraries and demo programs to implement an Embedded Internet/Ethernet Controller.
|
Features
AMD 80188-40 Embedded CPU, or compatible
Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
10BASE-T NE2000 compatible Ethernet Controller
Reloadable Operating Software
Remote Configuration
Diagnostics
COM driver support interrupt & 1K QUEUE Input & Output buffer
Support serial port
Built-in EEPROM
Built-in self-tuner ASIC controller on RS-485 port
support one RS-232 port and one RS-485 port
7-segment LED display for i-7188E2D
Built-in MiniOS7
Program download port: COM1 or Ethernet Port |
Applications
Factory Automation
Building Automation
Home Automation
|
Ordering information
i-7188E2
Internet communication controller with one RS-232, one RS-485 and one Ethernet
i-7188E2-MTCP
i-7188E2D with default Modbus/TCP firmware
i-7188E2D
i-7188E2D without LED display
i-7188E2 CR
Internet communication controller with one RS-232, one RS-485 and one Ethernet (RoHS)
i-7188E2-MTCP CR
i-7188E2D with default Modbus/TCP firmware (RoHS)
i-7188E2D CR
i-7188E2D without LED display (RoHS)
|
Specifications
| CPU |
| CPU |
80188, 40MHz or compatible |
| SRAM |
384K bytes |
| Flash Memory |
512K bytes |
| EEPROM |
2K Bytes |
| Built-in Watchdog Timer |
Yes |
| Communication Interface |
| COM1 |
RS-232 (TXD, RXD, RTS, CTS, GND) |
| COM2 |
RS-485 (D2+, D2-) |
| Ethernet Port |
10BASE-T NE2000 compatible Ethernet Controller |
| COM Port Formats |
| Data bit |
7, 8 |
| Parity |
Even, Odd, None |
| Stop bit |
1 |
| Baud Rate |
115200 bps Max. |
| LED Display |
| 5-Digit 7 Segment LED Display |
Yes (for i-7188E1D only) |
| System LED Indicator |
Yes |
| Dimensions |
| i-7188E1(D) |
123mm x 72mm x 33mm |
| Operating Environment |
| Operating Temperature |
-25°C to +75°C |
| Storage Temperature |
-40°C to +80°C |
| Power |
| Protection |
Power reverse polarity protection |
| Required Supply Voltage |
+10 to +30V/DC (non-regulated) |
| Power consumption |
2W for i-7188E2
3W for i-7188E2D |
|
|
|
|
|
|
|
|
|
| Featured Products |
|
|
