Description - RS232 to CAN Converters Module
CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The i-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface. Nowadays the interface is present in every new PC and is supported by the MS-Windows 98, Me, 2000 and XP operating systems. If you establish the connection between the i-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).
The following figure shows the application architecture for i-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the i-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface. |
| |
Application
Control System
Monitor System
Building Automation
Factory Automation
Vehicle Automation
Home Automation |
Ordering information:
i-7565 CR
Intelligent USB to CAN converter (RoHS)
Include Cable
CA-USB18(1.8M Cable)x1 |
Features
RoHs Design |
| Fully compliant with USB 1.1/2.0(Full Speed) |
| Fully compatible with the ISO 11898-2 standard |
| No external power supply is required as i-7565 takes it's power from the USB bus |
| Microprocessor inside with 20MHz |
| 82C250 CAN transceiver |
| Built-in converter firmware |
| Transmission speed up to 1M bps for CAN and 921.6K bps for USB |
| Software configurable CAN and USB communication parameters |
| Max transmission distance over 1000 m (follow CAN specification) |
| Support both CAN 2.0A and CAN 2.0B |
| Built-in jumper to select 120 ohm terminal resister |
| Mount easily on DIN-rail |
| Power, data flow and error indicator for CAN and USB |
| Watchdog inside |
| Windows 98/ME/2000/XP drivers supported |
| Linux driver supported |
| Free DLL for VC++, VB, and BCB |
|
| Specifications |
| |
| USB interface connector |
USB Type B |
| CAN interface connector |
D-Sub, 9-pin |
| Isolation voltage |
3000Vrms on the CAN side |
| Accessories |
One USB Type A to Type B cable |
| Dimensions |
108mm x 72mm x 35mm |
| Operation temperature |
-25 to + 75 (degree C) |
| Storage temperature |
-40 to +80 (degree C) |
| Repeater request |
over than 1000m (suggestion) |
| Power consumption |
1W max |
| Communication speed |
921.6K bps fixed for USB
1M bps max for CAN |
|
