Home

PIO-D56

PIO-D56

Description

PCI BUS 56-channel DIO Board

Features

PCI bus

Up to 56/24(PIO-D56/PIO-D24) channels of digital I/O

All I/O lines buffered on the board

Eight-bit groups independently selectable for I/O on 24-bit port

Input / Output programmable I/O ports under software control

Double side SMD, short card.

Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R, DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards

4 interrupt sources: PC0,PC1,PC2,PC3

One DB37 connector, two 20-pin headers(only for PIO-D56)

High driving capability

Automatically detected by windows 95/98/NT

No base address or IRQ switches to set

DIO response time is about 0.77 us (1.3 MHz max.)

Software

Toolkit for DOS

Toolkit for Windows 95/98

Toolkit for Windows NT

Toolkit for Windows 2000/XP

LabVIEW toolkit for Windows

Toolkit for OCX 95/98

Toolkit for OCX NT

Toolkit for OCX 2000/XP

Driver for LINUX

Driver for DasyLab

Ordering Information

PIO-D56

PCI BUS 56-channel DIO Board

PIO-D24

PCI BUS 24-channel DIO Board

Specifications:

All inputs are TTL compatible
Logic high voltage: 2.4V ( Min. )
Logic low voltage: 0.8V ( Max. )
All outputs are TTL compatible
OPTO-22 outpur (CON3)
Sink current	64mA (Max.)
Source current	32mA(Max.)
16-channel output (CON1)
Sink current	8mA (Max.)
Source current	0.4mA(Max.)
Power Requirements
PIO-D56	+5V@580mA
PIO-D24	+5V@420mA
Environmental
Operating temperature	0~60°C
Storage temperature	-20°C~70°C
Humidity	0 to 90% non-condensing
Dimensions
Dimensions	143 mm x 105 mm