Home

PIO-DA4

PIO-DA4

Description

PCI bus 4-channel D/A board

Features

PCI bus

16/8/4 channels, 14-bit analog output

Unipolar or bipolar outputs available from each converter

Output type (Unipolar or bipolar) and output range ( 0~5V, ±5V, 0~10V and ±10V) can be software programmable

4~20mA or 0~20mA current sink to ground for each converter

Two pacer timer interrupt source

Double-buffered D/A latches

Software calibration

16-channel DI, 16-channel DO

SMD, short card

One D-Sub connector, two 20-pin flat cable connectors

Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR

Automatically detected by Windows 95/98/NT

No base address or IRQ jumper need to set

Applications

High speed data acquisition system

Process monitor and control.

Vibration analysis.

Digital pattern generator from digital I/O port

Software

Toolkit for DOS

Toolkit for Windows 95/98

Toolkit for Windows NT

Toolkit for Windows 2000/XP

LabVIEW toolkit for Windows

Toolkit for OCX 95/98

Toolkit for OCX NT

Toolkit for OCX 2000/XP

Driver for LINUX

Driver for DasyLab

Ordering Information

PIO-DA4

PCI bus 4-channel D/A board

PIO-DA4/S

PIO-DA4 with DN-37

Specifications:

Analog Outputs
D/A converter	Quad 14-bit MDAC
Channels	16/8/4 independent
Resolution	14-bit
Type	double-buffered, multiplying
Integral linearity	0.006% FSR (typical)
Differential linearity	0.006% FSR (typical)
Voltage output range	Unipolar: 0~5V or 0~10V
Voltage output range	Bipolar: ±10V or ±5V
Current drive	±5mA
Absolute accuracy	0.01% FSR (typical)
Current output range	0~20mA or 4~20mA
Absolute accuracy	0.1% FSR (typical)
Excitation voltage range	+7V to +40V
Power consumption
PIO-DA4	+5Vdc@600mA
PIO-DA8	+5Vdc@800mA
PIO-DA16	+5Vdc@1400mA
Environmental
Operating temperature	0~50°C
Storage temperature	-20~70°C
Humidity	0 to 90% non-condensing
Dimensions
Dimensions	180 mm x 115 mm