Description
The PISO-725 is a 16-channels of digital input/output interface board for the PCI bus computers. The PISO-725 provides 8-channel of electromechanical relay outputs and 8-channel of isolated/non-isolated digital inputs. The digital input channels can be isolated or non-isolated selected by hardware jumper. All digital inputs can generate an interrupt if a state change occurs at any one or more of the inputs. This is very useful when monitoring for contact closures/openings because it is not necessary to continuously poll the inputs. All relays are de-energized at power-on. On/Off status of the relays can be read back. The PISO-725 can be used in various applications including contact closure, external voltage sensing, and loading sensing and designed for control and sensing applications. The PISO-725 has one 37-pin D-Type connector. It can be installed in a 5V PCI slot and can support truly “Plug & Play”.
|
| |
Features
State-changed interrupt for all digital inputs
8-channel of digital inputs
Digital input can be isolated or non-isolated selected by hardware jumper
8-channel of electromechanical relays
Two Form-C relay
One Form-C for user’s external device: COM, NC, NO
The other Form-C for relay status read back
LED indicates Output state
One 37-pin D-type connector for input and output
Automatically detected by Windows 95/98/2000/NT
|
|
Applications
Factory automation
Product test
Laboratory automation
|
|
Softwares
Toolkit for DOS
Toolkit for Windows 95/98
Toolkit for Windows NT
Toolkit for Windows 2000/XP
LabVIEW toolkit for Windows
Toolkit for OCX 95/98
Toolkit for OCX NT
Toolkit for OCX 2000/XP
Driver for LINUX
Driver for DasyLab
|
|
Ordering Information
PISO-725
8-channel Relay Output & 8-channel Isolated Digital Input Board
Includes one CA-4002 D-Sub connector.
|
| |
| Specification |
| Input |
|
Channel No.
|
8
|
|
Isolated /non-isolated input selected by jumper JA & JB
|
|
Photo-coupler for isolated input
|
PC-357
|
|
Input impedance
|
3K (DC 24V, 7.67mA) for each channel )
|
|
Input_high voltage for isolated input
|
3.5 ~ 30V
|
|
Input_low voltage for isolated input
|
0 ~ 1V
|
|
Input impedance for isolated input
|
1.2K, 1W
|
|
Isolation voltage for isolated input
|
3750V
|
|
Response time for isolated input
|
20uS
|
|
Non-isolated input
|
TTL compatible
|
| Output |
|
Channel
|
8
|
|
Two Form-C relay
|
COM, NC & NO(the other Form-C for read back)
|
|
Contact rating
|
AC ( 0.3A/120VAC) / DC ( 1A/30VDC)
|
|
Operating time
|
5ms
|
|
Release time
|
10ms
|
|
Life
|
100,000 times (at 30V/1A)
|
| Power |
|
Power consumption
|
300mA@5V, typical
|
| Environmental |
| Operating temperature |
0~60°C |
| Storage temperature |
-20°C~70°C |
| Humidity |
0 to 90% non-condensing |
| Dimensions |
| Dimensions |
150mm x 110mm |
|
| |
