PISO-C64
View Full-Size Image


PISO-C64



Ask a question about this product

Description

The PISO-C64 has 64-channel of optically isolated digital outputs, arranged into two isolated banks. Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power. This interface board is easily installed in any PC/AT/XT. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The ISO-C64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector . Each D-Sub connector contains 32 output channels.
Features

  • 64-channel optically isolated digital output /open collector
  • Four isolated bank.
  • 3750VDC isolation voltage

  • Applications

  • Factory automation
  • Product test
  • Laboratory automation

  • Softwares

  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000/XP
  • Driver for LINUX
  • Driver for DasyLab

  • Ordering Information

    PISO-C64

    64-channel Optically Isolated Open-collector Digital Output Board (Current Sinking)
    Includes one CA-4037B cable and two CA-4002 D-Sub connectors.

    PISO-C64 CR

    64-channel Optically Isolated Open-collector Digital Output Board (Current Sinking) (RoHS)
    Includes one CA-4037B cable and two CA-4002 D-Sub connectors.
    Specification
    Type
    Isolated open collector
    100mA per channel(NPN)
    Max. Current
    100mA
    Duty Cycle
    60% for PISO-C64 Total Current Output
    External voltage
    30V (Max.) Response time: 1Khz Typical
    Power
    Power requirements +5V 800mA (typical)
    Environmental
    Operating temperature 0~60°C
    Storage temperature -20°C~70°C
    Humidity 0 to 90% non-condensing
    Dimensions
    Dimensions 180mm x 105mm






    Featured Products
    PDX-057T (2008 Q4)
    PDX-057T (2008 Q4)


    IPPC-1942
    IPPC-1942


    IPPC-1742
    IPPC-1742


    IPPC-1543
    IPPC-1543


    PPC-3717GS
    PPC-3717GS


    PPC-3715GS
    PPC-3715GS


    © 2008 ADAPTEK AUTOMATION TECHNOLOGY.